Dahua NVR2104HS-P-S3 - Main Device

Procedure
Step 1 Log in to the web as the admin user.
Step 2 Select SETTING > Cluster Service > CLUSTER IP.
Step 3 Select Enable.
Step 4 Congure IP Address , Subnet Mask and Default Gateway.
Step 5 Click OK.
6.4.2 Main Device
Background Information
You can add several main devices manually. After you enable the cluster function, you can vie IP
address, working status and connection log of the main device.
Procedure
Step 1 Select SETTING > Cluster Service > Main Device.
Step 2 Click Manual Add.
Figure 6-2 Manual add
Step 3 Congure parameters.
Table 6-2 Parameters of adding main device
Parameter
Description
Device Name Customize the device name.
IP Address Enter the IP address of the NVR.
User's Manual
436