Dahua NVR2104HS-P-S3 - Page 352

Figure 5-219 UPnP
Step 2 Congure the settings for the UPnP parameters.
Table 5-63 UPnP parameters
Parameter
Description
Port Mapping Enable the UPnP function.
Status
Indicates the status of UPnP function.
●
Oine: Failed.
●
Online: Succeeded.
LAN IP
Enter IP address of router on the LAN.
After mapping succeeded, the system obtains IP address automatically.
WAN IP
Enter IP address of router on the WAN.
After mapping succeeded, the system obtains IP address automatically.
User's Manual
338