Local Basic Operations 51
If PPPoE connection is successful, the IP address, subnet mask,
default gateway, and DHCP are not available for configuration.
System can process the downloaded data first if you enable this
function. The download speed is 1.5X or 2.0X of the normal speed.
For IPv6 version, the IP address, default gateway, preferred DNS;
alternate DNS is 128-digit. Fill in all items here.
This function is for some series product only.
Step 6 Click Next to complete the settings.
4.1.4.3 P2P
Scan the QR code, download the App to the cell phone, you can use the smart phone to add the
device.
Scan the QR code on the actual interface to download the cell phone app. Register an
account and then use.
Go to the www.easy4ip.com to register an account and use the SN to add a device. Refer to
the P2P operation manual for detailed information.
Before use the P2P function, make sure the NVR has connected to the WAN.
Step 1 Click Next button.
The P2P interface is displayed. See Figure 4-22.
Select Main Menu > Network > P2P, you can go to P2P interface too.
To Next Page
Loading...
Need help?
General