Local Basic Operations 61
the SCHEDULE interface.
4.1.4.6.1 Recording Schedule
After set schedule record, device can record video file according to the period you set here. For
example, the alarm record period is from 6:00–18:00 Monday, device can record alarm video
files during the 6:00–18:00.
All channels are record continuously by default. You can set customized record period and
record type.
Step 1 Click Next button.
The Rec interface is displayed. See Figure 4-32.
Figure 4-32
Step 2 Select a channel from the dropdown list, you can set different record plans for different
channels. Select All if you want to set for all channels. See Table 4-9.
Table 4-9
In the Channel list, select a channel to record the video.
In the Pre-record list, enter the amount of time that you want to start
the recording in advance.
If there are several HDDs installed to the Device, you can set one of
the HDDs as the redundant HDD to save the recorded files into
different HDDs. In case one of the HDDs is damaged, you can find the
backup in the other HDD.
Select Main Menu > STORAGE > HDD MANAGER, and then
set a HDD as redundant HDD.
Select Main Menu > STORAGE > SCHEDUE > Record, and
To Next Page
Loading...
Need help?
General