Daikin FTXS-L Series - Page 178

SiUS091133 Indoor Unit: FTXS09/12LVJU
Removal Procedure 168
7
Pull out the indoor heat
exchanger thermistor.
 The position of the indoor heat
exchanger thermistor varies by
model.
 Be careful not to lose the clip of
the thermistor.
8
Remove the screw and
detach the ground wire.
9
Remove the screw of
the electrical box.
10
Unfasten the hook at
the upper far side by
pressing it from above
and pulling the
electrical box.
Step
Procedure Points
(R7937)
Indoor heat exchanger thermistor
Clip
(R11268)
(R16969)
Ground wire
(R3939)
(R8081)
Hook