Indoor Unit: FTXS09/12LVJU SiUS091133
181 Removal Procedure
2. Remove the indoor heat
exchanger.
1
Detach the indoor unit
from the installation
plate.
2
Unfasten the hook of
the piping fixture at the
back of the indoor unit.
Remove the piping
fixture.
3
Widen the auxiliary
piping.
4
Remove the 2 screws
on the left side. Caution
When removing or reassembling
the indoor heat exchanger, be
sure to wear gloves or wrap the
indoor heat exchanger with
cloth. (You may be injured by the
fins.)
Step
Procedure Points
To Next Page
Loading...
