Daikin FTXS-L Series - Page 239

Indoor Unit: FTXS30/36LVJU SiUS091133
229 Removal Procedure
3. Release the ground wire
and the indoor heat
exchanger thermistor.
1
Remove the screw and
release the ground
wire.
2
Pull out the indoor heat
exchanger thermistor.
 Be careful not to lose the clip of
the thermistor.
4. Remove the electrical
box.
1
Remove the 4 screws
and disconnect the
connection wires on the
terminal board.
Remove the screw and
remove the wire
retainer.
Step
Procedure Points
1
2
3
(R16976)
Ground wire
1
2
3
(R9498)
Indoor heat exchanger thermistor
Clip
(R11268)
1
2
3
(R9499)
Terminal board
Wire
retainer