Daikin SUPER MULTI NX G Series - Removal of the PCB

SiUS12-928 Outdoor Unit – 2MXS18GVJU
Removal Procedure 166
1.3 Removal of the PCB
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure Points
1. Removal of the control PCB
1
Remove the 1 screw of
the PCB, and unfasten
the 2 hooks.
2
Unfasten the hook of the
terminal board, and open
the terminal board.
3
Disconnect each
connector on the back of
the terminal board (S11,
HL, HN).