Daikin SUPER MULTI NX G Series - Page 204

Outdoor Unit – 3MXS24JVJU / 4MXS32GVJU SiUS12-928
195 Removal Procedure
8
Disconnect the connector
for the thermistors [S90]
 Pull out the clamp.
9
The wire harness of the
thermistors is hooked
under the electrical box.
Unhook it and pull out the
clamp.
 Pull out the clamp.
10
Disconnect the connector
for the overload protector
[S40].
 Pull out the clamp.
Step
Procedure Points
S90
(R10538)
Clamp
Hook
(R6420)
S40
(R10539)