IM 1227 • MODELS DC THERMOSTATS 40 www.DaikinApplied.com
high resoluTion TouCh sCreen DigiTal ThermosTaT
Security
Table 11: Security Settings Command Levels
●
Auto Screenlock
►
●
Auto Screenlock – OFF
►
●
Set Passcode
►
●
Lock After...
►
●
Allow fan/mode changes – NO
►
●
Allow setpoint changes – NO
►
●
Allow override – NO
►
●
Setpoint Limits
►
●
Setpoint Limits – OFF
►
●
Minimum Cool Setpoint
►
●
Maximum Heat Setpoint
►
Using the Security Functions
SecuritySecurity settings may be set to limit or prevent
changes to your thermostat.
●
Auto Screenlock
►
●
Auto Screenlock – OFF
►
●
Auto Screenlock – ON
●
Set Passcode* (code not set )
►
NOTE: Code must be set before Auto Screenlock can be
turned on.
* If you forget your passcode, enter 6736 for access.
Use keypad to enter and conrm passcode.
Figure 41: Keypad Display
When the thermostat is locked, the bottom bar of the display
will show:
Press UNLOCK then enter passcode to access thermostat
settings.
Figure 42: Unlock Button Location
●
Lock After... (5 m)
►
Set the time the screen will automatically lock after the last
button press.
●
Allow fan/mode changes – NO
►
Choose to allow mode changes when Auto Screenlock is
ON.
●
Allow setpoint changes – NO
►
Choose to allow setpoint changes when Auto Screenlock is
ON.
●
Allow override – NO
►
Choose to allow use of the Override button when Auto
Screenlock is ON.
●
Setpoint Limits
►
Limits how high or low heating and cooling may be adjusted.