Dali Sound Hub User Manual

5.4 Source Selection
To select a SOUND HUB audio source, press either
the SOUND HUB front panel or remote control source
selection ( ) buon. NPM or HDMI sources can only
be selected if the necessary modules are installed in the
SOUND HUB. The currently selected source is indicated
by the illuminated icon in the SOUND HUB display.
If your SOUND HUB has NPM or HDMI modules
installed, depending on which installation slot they occupy,
their selection will be indicated by the “Slot1” ( ) or
“Slot2” ( ) icon illuminating in the SOUND HUB display.
5. Using Your SOUND HUB
NOTE:
Depending on whether SOUND HUB Auto Signal Sensing is
engaged, sources may select automatically when they become
active. Auto Signal Sensing is described in Section5.5 /
page25.
Source Selection
buon
Source Selection
buon
24

Dali Sound Hub Specifications

General

Mounting type	Shelf/wall-mounted
Product color	Black
DC input voltage	4.5 V
Number of audio source inputs	-

Weight and Dimensions

Depth	213 mm
Width	300 mm
Height	76 mm
Weight	1600 g