Danfoss DEVIreg Multi User Manual

Installation and User Guide DEVIreg™ Multi
FEC | Produced by Danfoss ©14
Main Screen view – explanation
The screen below is visible close to the maximum different information which can be
presented on display.
The following Main Screen texts, abbreviations, icons have a special meaning:
Lines with data for
Active Channels #1-#7
Line with mode
Manually Of
over mode PR with
the remaining time
in 57 min.
Line with mode
Manually On
over mode 1S with
the remaining time
in 133 min.
Line with mode PR
with set up cycle time
180 min. and
Heating On status
during 120 min.
The real time after
begining of the cycle
is 113 minutes
Channel OFF
Channel
with Alarm
Sensor fault – open
or short circuit,
or not connected
Device
Time
Degrees
in Celsius
Device
Alarm
Sofware
version
Regulation
type
Real Temp.
on the
sensor for
1S mode
Heating
status
Set up
Temp.

Danfoss DEVIreg Multi Specifications

General

Brand	Danfoss
Model	DEVIreg Multi
Category	Controller
Language	English