Danfoss DEVIreg Multi

Installation and User Guide DEVIreg™ Multi
FEC | Produced by Danfoss ©32
4.4.12 Language setting
Language settings can be done by the following menu sequence:
EN: Main Screen – Enter to Main Menu – Language – { Enter – English/Polish/
Russian/Ukrainian/… }
EN: Main Screen – Enter to Main Menu – Language – { Enter – English/Polish/Rus-
sian/Ukrainian/… }
NB: Different software versions can be with different set of languages.
4.4.13 Date and Time settings
DEVIreg™ Multi controller has RTC (Real Time Clock) for fixing time of data logging
information, for example Alarms.
Date and Time settings can be done by the following menu sequence:
EN: Main Screen – Enter to Main Menu – Device settings – Date & Time setup –
{ Enter – Right/Left – Enter – YYYY – MM – DD – WD – hh – mm – ss }
EN: Main Screen – Enter to Main Menu – Device settings – Date & Time setup – {
Enter – Right/Left – Enter – YYYY – MM – DD – WD – hh – mm – ss }
NB: Battery back-up time is min. 48 hours.
4.4.14 BMS settings
DEVIreg™ Multi controller has Modbus RS-485 opto-insulated serial interface.
Modbus RS-485 settings can be done by the following menu sequence:
EN: Main Screen – Enter to Main Menu – Device settings – BMS settings – { Enter –
Serial address – Down – Serial baud rate – Down – Serial settings }
EN: Main Screen – Enter to Main Menu – Device settings – BMS settings – { Enter –
Serial address – Down – Serial baud rate – Down – Serial settings }
More detailed information is contained in the Appendix A.