Installation and User Guide DEVIreg™ Multi
FEC | Produced by Danfoss ©34
6 Technical Specifications
6.1 Technical data
Type Value
Nominal voltage 110/230 V AC, 50–60 Hz
Power consumption, max. 20 V A
Relay resistive (inductive, cos(phi) = 0,6) load:
Total current load limit
C1-NO1, C2-NO2
C5-NO5, C6-NO6
C3-NO3-NC3, C4-NO4-NC4
C7-NO7-NC7, C8-NO8-NC8
32 A
10 (3,5) A (100 000 cycles)
6 (4) A (100 000 cycles)
6 (4) A (100 000 cycles)
6 (4) A (100 000 cycles)
Sensor inputs Analog inputs AI1-AI8
Sensing unit Temperature sensors separately selectable via
software at analog inputs AI1-AI7 between:
NTC15k (15 kOhm @ 25 °C)
NTC10k (10 kOhm @ 25 °C)
NTC5k (5 kOhm @ 25 °C)
NTC2k (2 kOhm @ 25 °C)
NTC100 (100 kOhm @ 25 °C)
NTC16k (16,7 kOhm @ 100 °C)
PT1000 (1000 Ohm @ 0 °C)
Ni100 (100 Ohm @ 0 °C)
Sensor failure monitoring Disconnected or short-circuited sensor
Digital inputs DI1-DI8, voltage free contacts, on/off inputs
Connection specification Grouped screws plug-in connectors, pitch 5 mm
Cable specification for connectors terminals 0,2-2,5 mm²
Battery back-up time, min. 48 hours
Ball pressure test 125 °C according to IEC 60730-1
Pollution degree 2 (domestic use)
Controller type 1 C
Operating temperatures and conditions CE: -20T60 / UL: 0T55, 90% RH non-condensing
Storage temperature and conditions -30Т85, 90% RH non-condensing
IP class IP40 only on the front cover
Protection class Class II -
Immunity against voltage surges Designed for Over Voltage Category II
Dimensions (H/W/D), DIN dimension : 110(122) х 138 х 70 mm, 8 DIN modules
Mounting method DIN-rail, complying with EN 60715
Weight, net 511 g
Menu languages: v01.7: EN, PL, RU, UA
Base controller Danfoss MCX08M2, item no. 080G0307
Software class A
To Next Page
Loading...
Need help?
General
