Installation and User Guide DEVIreg™ Multi
FEC | Produced by Danfoss © 27
4.4.8 Device ON/OFF – special function and switch
DEVIreg™ Multi controller can be set up by Menu with status OFF. This means that there
is no need to carry out any regulation for all 7 Channels. At the same time all Channels
save all settings and for 1S mode active Channels show real sensor temperature and for
PR mode – show real time. Additionally, it is possible to do/change any settings.
Settings Device ON/OFF function can be done by the following menu sequence:
EN: Main Screen – Enter to Main Menu – Device ON/OFF – {Enter – Turn device ON –
Down – Turn device OFF/ON }
EN: Main Screen – Enter to Main Menu – Device ON/OFF – {Enter – Turn device ON –
Down – Turn device OFF }
When Device is OFF by special function a hash sign/symbol – ‘#’ – is visible in the left
corner of Main Screen, for example like on the screen below:
To Next Page
Loading...
