Installation and User Guide DEVIreg™ Multi
FEC | Produced by Danfoss ©16
Activation or deactivation can be done by the following menu sequence:
EN: Main Screen – Enter to Main Menu – Channels settings – Activate channels –
Activate #X
1)
– { Enter – Up/Down (YES/NO) – Enter }
2)
1)
– here and further #X means any Channel number in diapason from #1 to #7.
2)
– here and further brackets indicate more detailed sequence.
EN: Main Screen – Enter to Main Menu – Channels settings – Activate channels –
Activate #X1) – { Enter – Up/Down (YES/NO) – Enter }
Example of the base screens for the sequence above:
To Next Page
Loading...
Need help?
General
