Danfoss H1 - Technical Specifications; H1 T General Specifications; Technical Data H1 Tandem

Connector
1 2
P003 480
Connector ordering data
Description Quantity Ordering number
Mating connector 1 Deutsch® DT06-2S
Wedge lock 1 Deutsch® W2S
Socket contact (16 and 18 AWG) 2 Deutsch® 0462-201-16141
Danfoss mating connector kit 1 K29657
Case gauge port M14
The drain port should be used when the control is mounted on the unit’s bottom side to flush residual
contamination out of the control.
MDC w/h drain port shown
P301 749
MDC schematic diagram
P005 701
M14
M5
M4
M3
Lever
MDC-controls are available with an integrated lever.
Technical Information
H1 Axial Piston Single Pumps, Size 069/078
Control options
22 11062169 • Rev 0700 • November 2015