Danfoss Heating
19
GB
Alternatively, Thermostat Mode can be selected and deselected via
the MODE button.
Thermostat/Auto modes can also be toggled remotely via the
Remote Override, see page 22.
When in Thermostat mode, the hand symbol is shown to indicate this
is a manual setting mode.
NOTE: The frost protection shield symbol will also be displayed when
the selected temperature is equal to or less than the programmed
frost protection setting.
2.3 Holiday Mode
The TP7001 can control at a constant low temperature while you are away
on holiday, returning to your programmed settings at a speci ed date.
Press and hold the DAY button for at least 3 seconds (the display will
show a suitcase and a date with the year ashing - Fig 27). Now you
can set the date of your return.
The YEAR number will ash, use the Λ or V buttons to set the year
of your return.
Use the - or + buttons to move to MONTH. The MONTH number will
ash (Fig 28). Then use Λ or V to set the month of your return.
Use the - or + buttons to move to DAY in month of your return. The
DAY number will ash (Fig 29). Then use the Λ or V button to set on
which day in month you will return.
Fig. 27
Fig. 28 Fig. 29
To Next Page
Loading...
