TP7001
8
GB
1.3 Preset Programmes
Your TP7001 comes ready programmed with a set of operating times
and temperatures which often suit most people.
If you want, you can change any of these settings by following the
instructions on pages 11 to 17. First follow the steps on page 9 to set
your display preferences.
1.4 Before you start
Open the ap on the front of your TP7001.
Using a non-metallic object, press and
release the recessed RESET button.
NOTE: Your TP7001 features a backlight
on it’s display. Unless this has been
disabled or set to be on all the time
(mains version only), the rst press of any
button will cause the backlight to come
on. In order to action a function, a repeat
press of the button will be required. All
buttons will then operate as normal until
the unit is left untouched for 2 minutes
and then the next button press will
activate the backlight again.
Weekdays (Mon-Fri) Weekend (Sat-Sun)
Event Time Temp °C Event Time Temp °C
1 06:30 20 1 07:30 20
2 08:30 15 2 09:30 20
3 11:30 20 3 11:30 20
4 13:30 15 4 13:30 20
5 16:30 21 5 16:30 21
6 22:30 15 6 22:30 15
To Next Page
Loading...
