TP7001
22
GB
2.4.4 Delay start feature (Economy Setting)
Your thermostat includes an optional delay start feature to hold o
the heating for a time on mild days when the room temperature at
the start of an event is close to the programmed value. If you have
enabled this function it can be overridden by pressing either Λ or
V buttons. A full description of this and how to enable it and set it
up is given in User Advanced Programming, options 11, 12 & 13,
(pages 25-27)
Note: When this function is active, the set temperature will ash on
the display and an hourglass symbol will be displayed.
2.4.5 Optimum start control (OSC) (Comfort Setting)
Your thermostat includes an optional optimum start control. This
feature allows you to set the time at which you require a room
temperature by. The thermostat then calculates how soon before
the event time the system must be turned up to ensure that the
room is at the temperature by the required time. A full description
of this and how to enable it and set it up is given in User Advanced
Programming, options 11, 12 & 13, (pages 25-27).
Note: When this function is active, the set temperature will ash on
the display. The function can be overridden by pressing the or
buttons.
2.4.6 Remote override in and out of thermostat mode
If the installer has tted a telephone activated switch or window
contacts, then it is possible to step the unit into or out of thermostat
mode.
The required temperature to be maintained when the building is
unoccupied, or when windows are open, must rst be set up in User
Advanced Programming, option 10, (page 25).
To locally override this feature press and hold both Λ and V together.
The remote override function will also allow for exit from Holiday
Mode.
To Next Page
Loading...
Need help?
General
