Danfoss TP7001 User Manual

Danfoss Heating
9
GB
1.5 Display Preferences
Temperature display (°C or °F)
Press and hold V and - buttons for 2-3
seconds until display changes.
Clock display (12 or 24 hr)
Press and hold Λ and + buttons for 2-3
seconds until display changes.
(AM or PM will appear in 12 hr mode)
Days of the week (numbers or text)
Press Λ and – to toggle between day
numbers and text
1.6 Setting the Time and Date
Setting the correct date and time
Your TP7001 incorporates a real time clock with calendar function
that automatically changes time in both Spring and Autumn. The
time and date is set in the factory for the relevant time zone (GMT,
CET or CET+1), and does not normally require adjustment. If you live
in another time zone refer to “Time zone o set” on page 24. However,
should it be found necessary to adjust time or date for any other
reason refer to the following instructions.

Danfoss TP7001 Specifications

General

Brand	Danfoss
Model	TP7001
Category	Thermostat
Language	English