Danfoss TP7001 - Programming in 5;2 Day Mode

TP7001
14
GB
1.82 Programming in 5/2 day mode
(One set of programmes for weekdays, another for weekends)
a) Press PROG button until Event 1  ashes, then press the DAY
button until display shows weekdays (Fig. 13).
b) Follow steps b and c on page 12 to programme times and
temperatures for weekdays (Fig. 14).
c) Press the DAY button to programme events for weekend (Day 6-7)
or press the COPY button to repeat weekday programme.
To return to RUN mode, press and release the PROG button. The
display will change to show the current time, set temperature and
actual temperature (Fig. 15).
Fig. 13 Fig. 14 Fig. 15