Danfoss TP7001 - Time Settings and Start-up Methods

TP7001
24
GB
Option 3-Automatic Summer/Winter Time Change
This establishes the rules that the automatic calendar
clock follows to calculate changes between summer
and winter time. Press + until Option 3 is displayed,
use Λ or V to select required setting.
0 = Disabled
1 = Manual
2 = European (Factory Setting)
3 = US New (After 2007)
4 = US Old (Before 2007)
Option 4 - Time Zone O set
This feature allows the time zone to be established
and corrects time display. Press + until Option 4 is
displayed, use Λ or V to select required setting.
0:00 = No time o set. UK models (Factory setting)
+1:00 = +1 Hour time o set, Central European models
(Factory Setting)
+2:00 = +2 Hour time o set, Eastern European models
(Factory setting)
-12:00 to 14:00 = -12 Hrs to 14 Hrs, in 0:15 hour steps
Option 5 - Backlight (Battery Version)
This feature allows the activation or deactivation of the
display backlight. Press + until Option 5 is displayed,
use Λ or V to select required setting.
0 = Backlight Disabled
1 = Backlight On for 6 seconds after a button press
(Factory Setting)
Option 5 - Backlight (Mains Version)
This feature allows the activation or deactivation of the
display backlight. Press + until Option 5 is displayed,
use Λ or V to select required setting.
0 = Backlight Disabled
1 = Backlight On for 6 seconds after a button press
(Factory default)
2 = Backlight Always On