Danfoss Heating
31
GB
Note to installers: Please use this table to record changes to default
settings.
Installer Settings
Option Description Installer Set Value
30 Set upper limit of temperature range
31 Set lower limit of temperature range
32 Enable O at lower limit
33 Enable On at upper limit
34 Select On/O or Chrono-proportional
35 Set Integration Time
36 Set temperature override rule
37 Set time duration of override rule
38 Relay state on low battery detect
(Battery products only)
40 Number of events per day
41 Operating Mode
(7 day, 5/2 day or 24 hour)
70 Keyboard disable rules
71 Random start rules (24V/230V only)
72 Owner site reference number
73 Owner thermostat reference number
74 Date format for calendar clock
75 LCD Switch O
80 +HRS Enable/Disable
81 Thermostat calibration bias
90 De ne remote sensor 1 type
(Connection b)
92 De ne remote sensor 2 type
(Connection C)
93 De ne remote sensor 3 type
(Connection d)
93 Set limit sensor set-point
94 Con gure digital input switch
To Next Page
Loading...
Need help?
General
