Danfoss VACON OPTE3 - Installing Option Board in VACON 100 INDUSTRIAL and FLOW

8.
1.

b
c
e30bi273.10
Close the cover of the control unit and attach the cable cover.
3.2 Installing Option Board in VACON® 100 INDUSTRIAL and FLOW
This topic gives instructions for Installing Option Board in VACON
®
100 INDUSTRIAL and FLOW, MR4–MR12.
Procedure
Open the cover of the AC drive.
M4x55
e30bi035.10
AN338644703080en-0002 / DPD02156 | 11Danfoss A/S © 2022.08
Installing
VACON® RS485 and CAN Bus Option Boards
Installation Guide