6 How to Programme
6.1 Parameter Selection
Parameters for AFE 302 are grouped into various
parameter groups for easy selection of the correct
parameters for optimized operation of the frequency
converter.
0-** Operation and Display
•
Basic Settings, set-up handling
•
Display and Local Control Panel parameters for
choosing readouts, setting up selections and
copying functions
4-** Limits Warnings
5-** Digital inputs and outputs includes relay controls
6-** Analog In/Out
7-** Controllers
8-** Communications and Options
14-** Special functions
15-** AFE information
16-** Data Read-Out
40-** Mains/Filter
How to Programme Operating Instructions
MG33X402 Danfoss A/S © Rev. 05/2014 All rights reserved. 43
6 6
To Next Page
Loading...
