6.7.4 8-5* Digital/Bus
Parameters for configuring the control word digital/bus
merging.
NOTICE
These parameters are active only when 8-01 Control Site
is set to [0] Digital and control word.
8-53 Start Select
Option: Function:
Allows a choice between controlling the Start
function via the terminals (digital input)
and/or via the bus.
NOTICE
This parameter is only active if
8-01 Control Site is set to [0] Digital and
control word.
[0] Digital input
[1] Bus
[2] Logic AND
[3] * Logic OR
How to Programme Operating Instructions
56 Danfoss A/S © Rev. 05/2014 All rights reserved. MG33X402
66
To Next Page