Danfoss vlt aqua Instruction

13-** Smart Logic Controller 6-56
14-** Special Functions 6-57
15-** FC Information 6-58
16-** Data Readouts 6-59
18-** Info & Readouts 6-60
20-** FC Closed-loop 6-60
21-** Ext. Closed-loop 6-61
22-** Application Functions 6-62
23-** Time-based Funtions 6-63
25-** Cascade Controller 6-64
26-** Analog I / O Option MCB 109 6-65
Parameter Options - Filter 6-66
Operation/Display 0-** 6-66
Digital In/Out 5-** 6-67
Comm. and Options 8-** 6-67
Special Functions 14-** 6-68
FC Information 15-** 6-69
Data Readouts 16-** 6-70
AF Settings 300-** 6-70
AF Readouts301-** 6-71
7 RS-485 Installation and Set-up 7-1
Network Configuration 7-5
FC Protocol Message Framing Structure 7-5
Examples 7-11
How to Access Parameters 7-12
8 General Specifications 8-1
9 Troubleshooting 9-1
Alarms and Warnings - Adjustable Frequency Drive (right LCP) 9-1
Alarms and Warnings - Filter (left LCP) 9-10
10 Index 10-1
VLT AQUA Low Harmonic Drive Instruction
Manual
Contents
MG.20.T1.22 - VLT
®
is a registered Danfoss trademark

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled