[35] Set digital out D low
Set digital output D low
[35] - any output with SL output D will be low.
[36] Set digital out E low
Set digital output E low
[36] - any output with SL output E will be low.
[37] Set digital out F low
Set digital output F low
[37] - any output with SL output F will be low.
[38] Set digital out A high
Set digital output A high
[38] - any output with SL output A will be high.
[39] Set digital out B high
Set digital output B high
[39] - any output with SL output B will be high.
[40] Set digital out C high
Set digital output C high
[40] - any output with SL output C will be high.
[41] Set digital out D high
Set digital output D high
[41] - any output with SL output D will be high.
[42] Set digital out E high
Set digital output E high
[42] - any output with SL output E will be high.
[43] Set digital out F high
Set digital output F high
[43] - any output with SL output Fwill be high.
[60] Reset Counter A
Reset Counter A
[60] - resets Counter A to zero.
[61] Reset Counter B
Reset Counter B
[61] - resets Counter B to zero.
[70] Start timer 3
Start Timer 3
[70] - Start Timer 3, see par. 13-20 for further description.
[71] Start timer 4
Start Timer 4
[71] - Start Timer 4, see par. 13-20 for further description.
[72] Start timer 5
Start Timer 5
[72] - Start Timer 5, see par. 13-20 for further description.
[73] Start timer 6
Start Timer 6
[73] - Start Timer 6, see par. 13-20 for further description.
[74] Start timer 7
Start Timer 7
[74] - Start Timer 7, see par. 13-20 for further description.
FC 300 Programming Guide 3 Parameter descriptions
MG.33.M8.02 - VLT
®
is a registered Danfoss trademark
193
3
To Next Page
Loading...
