Danfoss VLT AutomationDrive FC 300 Programming Guide

1Introduction
Programming Guide
Software version: 6.0x
This Programming Guide can be used for all FC 300 frequency converters with software version 6.0x.
The software version number can be seen from par. 15-43
Software Version .
1.1.1 Approvals
1.1.2 Symbols
Symbols used in this guide.
NB!
Indicates something to be noted by the reader.
Indicates a general warning.
Indicates a high-voltage warning.
* Indicates default setting
FC 300 Programming Guide 1 Introduction
MG.33.M8.02 - VLT
®
is a registered Danfoss trademark 3
1

Danfoss VLT AutomationDrive FC 300 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300
Category	DC Drives
Language	English