EasyManua.ls Logo

Danfoss VLT AutomationDrive FC 301

Danfoss VLT AutomationDrive FC 301
722 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21/71 in this parameter are available. Instances 100/150 and 101/151 are Danfoss specific. Instances 20/70 and 21/71 are ODVA-
specific AC motor profiles. For guidelines in telegram selection, refer to the VLT® DeciveNet MCA 104 Installation Guide.
N O T I C E
A change to this parameter is executed immediately.
Option
Name
Description
[0]
Instance 100/150
[1]
Instance 101/151
[2]
Instance 20/70
[3]
Instance 21/71
[6]
Instance 102/152
Parameter 10-11 Process Data Config Write
Table 586: Parameter 10-11 Process Data Config Write
10-11 Process Data Config Write
Default value: Size related
Parameter type: Option
Setup: All setups
Conversion index: –
Data type: Uint16
Change during operation: True
Option
Name
Description
[-]
None
[109]
Mode of operation
[302]
Minimum reference
[303]
Maximum reference
[312]
Catch up/slow down value
[321]
Touch target
[322]
Master scale numerator
[323]
Master scale denominator
[326]
Master Offset
[328]
Master offset speed ref
[341]
Ramp 1 ramp up time
[342]
Ramp 1 ramp down time
[351]
Ramp 2 ramp up time
[352]
Ramp 2 ramp down time
[361]
Ramp 3 ramp up time
[362]
Ramp 3 ramp down time
[380]
Jog/homing ramp time jog ramp time
AU275636650261en-000101 / 130R0334 | 329Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Table of Contents

Other manuals for Danfoss VLT AutomationDrive FC 301

Related product manuals