Danfoss VLT AutomationDrive FC 301

Option
Name
Description
[1698]
Warning word 3
[1804]
Mech brake count
[1820]
Commanded position
[1821]
Master position
[1823]
Virtual master pos.
[1824]
Marker pos. offset
[1825]
Latched actual pos.
[1826]
Actual velocity [pu/s]
[1827]
Safe opt. est. speed
[1828]
Safe opt. meas. speed
[1829]
Safe opt. speed error
[1836]
Analog input X48/2 [mA]
[1837]
Temp. input X48/4
[1838]
Temp. input X48/7
[1839]
Temp. input X48/10
[1840]
Analog input X49/1
[1841]
Analog input X49/3
[1842]
Analog input X49/5
[1843]
Analog input X49/7
[1844]
Analog out X49/9
[1845]
Analog out X49/11
[1846]
X49 digital output [bin]
[1860]
Digital input 2
[1889]
Mode of operation display
[1899]
Speed PID torque FF. [Nm]
[3421]
PCD 1 read from MCO
[3422]
PCD 2 read from MCO
[3423]
PCD 3 read from MCO
[3424]
PCD 4 read from MCO
[3425]
PCD 5 read from MCO
[3426]
PCD 6 read from MCO
[3427]
PCD 7 read from MCO
AU275636650261en-000101 / 130R0334346 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide