Danfoss VLT AutomationDrive FC 301

Option
Name
Description
[1740]
Fieldbus sync. delta
[1741]
Fieldbus profile velocity
[1742]
Fieldbus velocity FF.
[1743]
Fieldbus acceleration FF.
[1744]
Fieldbus target velocity
[1782]
Home position
[1783]
Homing speed
[1788]
Master home position
[3310]
Sync factor master
[3311]
Sync factor slave
[3401]
PCD 1 write to MCO
[3402]
PCD 2 write to MCO
[3403]
PCD 3 write to MCO
[3404]
PCD 4 write to MCO
[3405]
PCD 5 write to MCO
[3406]
PCD 6 write to MCO
[3407]
PCD 7 write to MCO
[3408]
PCD 8 write to MCO
[3409]
PCD 9 write to MCO
[3410]
PCD 10 write to MCO
[3644]
Terminal X49/7 bus control
[3654]
Terminal X49/9 bus control
[3664]
Terminal X49/11 bus control
[4520]
Type
Parameter 12-22 Process Data Config Read
Table 622: Parameter 12-22 Process Data Config Read
12-22 Process Data Config Read
Default value: Size related
Parameter type: Option, Array [156]
Setup: All setups
Conversion index: –
Data type: Uint16
Change during operation: True
Option
Name
Description
[0]
None
[15]
Readout: actual setup
AU275636650261en-000101 / 130R0334354 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide