Danfoss VLT AutomationDrive FC 301 Programming Guide

Parameter 12-32 Net Control
Table 631: Parameter 12-32 Net Control
12-32 Net Control
Default value: [0] Off
Parameter type: Option
Setup: 2 setups
Conversion index: –
Data type: Uint8
Change during operation: True
Shows the control source in instance 21/71.
Option
Name
Description
[0]*
Off
[1]
On
Parameter 12-33 CIP Revision
Table 632: Parameter 12-33 CIP Revision
12-33 CIP Revision
Default value: Size related
Parameter type: Range, 0 - 65535
Setup: 1 setup
Conversion index: 0
Data type: Uint16
Change during operation: True
This parameter is read-only. It shows the CIP version of the option software.
Parameter 12-34 CIP Product Code
Table 633: Parameter 12-34 CIP Product Code
12-34 CIP Product Code
Default value: Size related
Parameter type: Range, 0 - 65535
Setup: 1 setup
Conversion index: 0
Data type: Uint16
Change during operation: True
This parameter is read-only. It shows the CIP product code.
Parameter 12-35 EDS Parameter
Table 634: Parameter 12-35 EDS Parameter
12-35 EDS Parameter
Default value: 0
Parameter type: Range, 0 - 0
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation:
This parameter is used to configure the drive via DeviceNet and build the EDS-file.
Parameter 12-37 COS Inhibit Timer
Table 635: Parameter 12-37 COS Inhibit Timer
12-37 COS Inhibit Timer
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
Read-only change-of-state inhibit timer. If the option is configured for COS operation, this inhibit timer can be configured in the
forward open telegram to prevent that continuously changing PCD data generates extensive network traffic. The inhibit time is in
ms. 0 = disabled.
AU275636650261en-000101 / 130R0334362 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English