Danfoss VLT AutomationDrive FC 301

•
•
•
•
•
•
•
•
Bit
0
1
13
Voltage OK
Voltage exceeded
14
Torque OK
Torque exceeded
15
Timer OK
Timer exceeded
1
Different from [0] FC Profile. Options for bits 5 and 12–15 in parameter 8-13 Configurable Status Word STW:
[4] Position Error
[5] Position Limit
[6] Touch on Target
[7] Touch Activated
[8] Touch Sen. Found
[9] Vir. Master on Ref.
[22] Execution Distance Extended
[210] Pos. Set Acknowledge
AU275636650261en-000101 / 130R0334690 | Danfoss A/S © 2022.12
Integrated Motion Controller
VLT AutomationDrive FC 301/302
Programming Guide