Danfoss VLT AutomationDrive FC 302 - Page 199

13.2.4 Ordering Numbers for D Option: 24 V Back-up Supply
Description Ordering number
Uncoated Coated
VLT
®
24 V DC Supply MCB 107
130B1108 130B1208
Table 13.9 Ordering Numbers for D Option
13.2.5 Ordering Numbers for Software Options
Description Ordering number
VLT
®
MCT 10 Set-up Software - 1 user.
130B1000
VLT
®
MCT 10 Set-up Software - 5 users.
130B1001
VLT
®
MCT 10 Set-up Software - 10 users.
130B1002
VLT
®
MCT 10 Set-up Software - 25 users.
130B1003
VLT
®
MCT 10 Set-up Software - 50 users.
130B1004
VLT
®
MCT 10 Set-up Software - 100 users.
130B1005
VLT
®
MCT 10 Set-up Software - unlimited users.
130B1006
Table 13.10 Ordering Numbers for Software Options
13.2.6 Ordering Numbers for D1h–D8h Kits
Type Description Ordering number
Miscellaneous hardware
NEMA 3R outdoor weather
shield, D1h
Shield designed to protect drive openings from direct sun, snow, and
falling debris. Drives using this shield must be ordered from the
factory as NEMA 3R ready, which is found in the type code as E5S
enclosure option.
176F6302
NEMA 3R outdoor weather
shield, D2h
Shield designed to protect drive openings from direct sun, snow, and
falling debris. Drives using this shield must be ordered from the
factory as NEMA 3R ready, which is found in the type code as E5S
enclosure option.
176F6303
NEMA 3R for in-back/out-back
cooling kit within a welded
enclosure, D3h
Provides an ingress protection rating of NEMA 3R or NEMA 4. These
enclosures are intended for outdoor use to provide protection against
inclement weather.
176F3521
NEMA 3R for in-back/out-back
cooling kit within a Rittal
enclosure, D3h
Provides an ingress protection rating of NEMA 3R or NEMA 4. These
enclosures are intended for outdoor use to provide protection against
inclement weather.
176F3633
NEMA 3R for in-back/out-back
cooling kit within a welded
enclosure, D4h
Provides an ingress protection rating of NEMA 3R or NEMA 4. These
enclosures are intended for outdoor use to provide protection against
inclement weather.
176F3526
NEMA 3R for in-back/out-back
cooling kit within a Rittal
enclosure, D3h
Provides an ingress protection rating of NEMA 3R or NEMA 4. These
enclosures are intended for outdoor use to provide protection against
inclement weather.
176F3634
Adaptor plate, D1h/D3h Plate used to replace an enclosure D1/D3 with the D1h/D3h using the
same mounting conguration.
176F3409
Adaptor plate, D2h/D4h Plate used to replace an enclosure D2/D4 with the D2h/D4h using the
same mounting conguration.
176F3410
Back-channel duct kit, D3h Duct kit that converts enclosure to either in-bottom/out-top venting
or top only venting. Enclosure size: 1800 mm (70.9 in).
176F3627
Back-channel duct kit, D3h Duct kit that converts enclosure to either in-bottom/out-top venting
or top only venting. Enclosure size: 2000 mm (78.7 in).
176F3629
Back-channel duct kit, D4h Duct kit that converts enclosure to either in-bottom/out-top venting
or top only venting. Enclosure size: 1800 mm (70.9 in).
176F3628
How to Order a Drive Design Guide
MG38C202 Danfoss A/S © 01/2018 All rights reserved. 197
13 13