3.3 Interior View of J8 Drive
Illustration 3.1 shows the J8 components relevant to installation and commissioning.
1 Regen terminals 6 Mounting hole
2 LCP (local control panel) 7 Relays 1 and 2
3 Control terminals 8 Motor output terminals 96 (U), 97 (V), 98 (W)
4 Mains input terminals 91 (L1), 92 (L2), 93 (L3) 9 Cable clamps
5 Lifting ring 10 Ground terminals
Illustration 3.1 Interior View of J8 Drive
Product Overview Operating Guide
MG06I102 Danfoss A/S © 06/2018 All rights reserved. 7
3 3
To Next Page
Need help?
General