3.15.8. Parameter Info, 15-9*
Parameter lists
15-92 Defined Parameters
Array [1000]
0
*
[0 - 9999]
View a list of all defined parameters in the frequency converter. The list ends with 0.
15-93 Modified Parameters
Array [1000]
0
*
[0 - 9999]
View a list of the parameters that have been changed from their default setting. The list ends with 0. Changes
may not be visible until up to 30 seconds after implementation.
15-99 Parameter Metadata
Array [23]
0
*
[0 - 9999]
This parameter contains data used by the MCT10 software tool.
3. Parameter Description VLT
®
HVAC Drive Programming Guide
140
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
3
To Next Page
Loading...
