15-48 LCP Id No
Option: Function:
View the LCP ID number.
15-49 SW ID Control Card
Option: Function:
View the control card software version number.
15-50 SW ID Power Card
Option: Function:
View the power card software version number.
15-51 Frequency Converter Serial Number
Option: Function:
View the frequency converter serial number.
15-53 Power Card Serial Number
Option: Function:
View the power card serial number.
3.15.7. Option Ident. 15-6*
This read-only parameter group contains information about the hardware and software configuration of the options installed in slots A, B C0 and C1.
15-60 Option Mounted
Option: Function:
View the installed option type.
15-61 Option SW Version
Option: Function:
View the installed option software version.
15-62 Option Ordering No
Option: Function:
Shows the ordering number for the installed options.
15-63 Option Serial No
Option: Function:
View the installed option serial number.
VLT
®
HVAC Drive Programming Guide 3. Parameter Description
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
139
3
To Next Page
Loading...
