Danfoss VLT FC 100 Series Programming Guide

15-32 Alarm Log: Time
Array [10]
0 * [0 - 2147483647]
View the time when the logged event occurred. Time is measured in seconds from frequency converter start-up.
3.15.6. Drive Identification, 15-4*
Parameters containing read only information about the hardware and software configuration of the frequency converter.
15-40 FC Type
Option: Function:
View the FC type. The read-out is identical to the frequency converter series power field of the type code defi-
nition, characters 1-6.
15-41 Power Section
Option: Function:
View the FC type. The read-out is identical to the frequency converter series power field of the type code defi-
nition, characters 7-10.
15-42 Voltage
Option: Function:
View the FC type. The read-out is identical to the frequency converter series power field of the type code defi-
nition, characters 11-12.
15-43 Software Version
Option: Function:
View the combined SW version (or ‘package version’) consisting of power SW and control SW.
15-44 Ordered Typecode String
Option: Function:
View the type code string used for re-ordering the frequency converter in its original configuration.
15-45 Actual Typecode String
Option: Function:
View the actual type code string.
15-46 Frequency Converter Ordering No
Option: Function:
View the 8-digit ordering number used for re-ordering the frequency converter in its original configuration.
15-47 Power Card Ordering No
Option: Function:
View the power card ordering number.
3. Parameter Description VLT
®
HVAC Drive Programming Guide
138 MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
3

Danfoss VLT FC 100 Series Specifications

General

Brand	Danfoss
Model	VLT FC 100 Series
Category	DC Drives
Language	English