Danfoss VLT FC 100 Series Programming Guide

[73] kPa
[74] m WG
[80] kW
[120] GPM
[121] gal/s
[122] gal/min
[123] gal/h
[124] CFM
[125]
ft
3
/s
[126]
ft
3
/min
[127]
ft
3
/h
[130] lb/s
[131] lb/min
[132] lb/h
[140] ft/s
[141] ft/min
[145] ft
[160] °F
[170] psi
[171]
lb/in
2
[172] in WG
[173] ft WG
[180] HP
NB!
This parameter is only available when using Pressure to Temperature Feedback Conversion.
20-03 Feedback 2 Source
Option: Function:
See Feedback 1 Source , par. 20-00 for details.
20-04 Feedback 2 Conversion
Option: Function:
See Feedback 1 Conversion par. 20-01 for details.
20-05 Feedback 2 Source Unit
Option: Function:
See Feedback 1 Source Unit , par. 20-02 for details.
20-06 Feedback 3 Source
Option: Function:
See Feedback 1 Source , par. 20-00 for details.
VLT
®
HVAC Drive Programming Guide 3. Parameter Description
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark 155
3

Danfoss VLT FC 100 Series Specifications

General

Brand	Danfoss
Model	VLT FC 100 Series
Category	DC Drives
Language	English