Danfoss VLT FC 100 Series

20-07 Feedback 3 Conversion
Option: Function:
See Feedback 1 Conversion , par. 20-01 for details.
20-08 Feedback 3 Source Unit
Option: Function:
See Feedback 1 Source Unit , par. 20-02 for details.
20-12 Reference/Feedback Unit
Option: Function:
This parameter determines the unit that is used for the setpoint reference and feedback that the PID Controller
will use for controlling the output frequency of the frequency converter.
[0] None
[1]
*
%
[5] PPM
[10] 1/min
[11] RPM
[12] Pulse/s
[20] l/s
[21] l/min
[22] l/h
[23]
m
3
/s
[24]
m
3
/min
[25]
m
3
/h
[30] kg/s
[31] kg/min
[32] kg/h
[33] t/min
[34] t/h
[40] m/s
[41] m/min
[45] m
[60] °C
[70] mbar
[71] bar
[72] Pa
[73] kPa
[74] m WG
[80] kW
[120] GPM
[121] gal/s
[122] gal/min
[123] gal/h
[124] CFM
[125]
ft
3
/s
[126]
ft
3
/min
3. Parameter Description VLT
®
HVAC Drive Programming Guide
156 MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
3