0
*
[0-4]
Defines dates for additional working days that normally would be non-working days according to par. 0-81
Working Days
.
0-83 Additional Non-Working Days
Array with 15 elements [0]-[14] displayed below parameter number in display. Press OK and Step between elements by means of
▲
and
▼
buttons on
the LCP.
0
*
[0-14]
Defines dates for additional non-working days that normally would be working days according to par. 0-81
Working Days
.
0-89 Date and Time Readout
Option: Function:
Displays the current date and time. The date and time is updated continuously.
The clock will not begin counting until a setting different from default has been made in par. 0-70.
3. Parameter Description VLT
®
HVAC Drive Programming Guide
38
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
3
To Next Page
Loading...
Need help?
General