•
•
•
1 Introduction
1.1 Purpose of this Operating Guide
This Operating Guide provides information for safe installation and commissioning of the product. It is intended for use by qualied
personnel. Read and follow the instructions to use the drive safely and professionally. Pay particular attention to the safety instruc-
tions and general warnings. Always keep this Operating Guide available with the drive.
1.2 Trademarks
VLT
®
is a registered trademark for Danfoss A/S.
1.3 Additional Resources
Other resources are available to understand advanced drive functions and programming.
The Programming Guide provides greater detail on working with parameters and many application examples.
The Design Guide provides detailed information about capabilities and functionality to design motor control systems.
Instructions for operation with optional equipment and replacement of components.
Supplementary publications and manuals are available at:
www.danfoss.com.
1.4 Type Approvals and Certications
1.5 IT Mains
N O T I C E
IT MAINS
Installation on isolated mains source, that is IT mains. Maximum supply voltage allowed when connected to mains: 440 V.
As an option, Danfoss oers recommended line lters for improved harmonics performance. See chapter Options and Spare Parts.
1.6 Disposal
Do not dispose of equipment containing electrical components together with domestic waste.
Collect it separately in accordance with local and currently valid legislation.
AQ348848915086en-000101 / 130R0943 | 5Danfoss A/S © 2020.09
Introduction
VLT® Micro Drive FC 51
Operating Guide
To Next Page
Loading...
Need help?
General
