Danfoss VT2800 Series User Manual

VLT
®
2800 Series
■ PC Software tools
PC Software - MCT 10
All drives are equipped with a serial communication
port. We provide a PC tool for communication
between PC and frequency converter, VLT Motion
Control Tool MCT 10 Set-up Software.
MCT 10 Set-up Software
MCT 10 has been designed a s an easy to
use interactive tool for setting parame ters in
our frequency converters.
The MCT 10 Set-up Software will be useful for:
• Planning a communication network off-line. MCT 10
contains a complete frequency converter database
• Commissioning frequency converters on line
• Saving settings for all frequency converters
• Replacing a drive in a network
• Expandinganexistingnetwork
• Future developed drives will be supported
MCT10Set-upSoftwaresupportProfibusDP-V1via
a Master class 2 connection. It makes it possible to
on line read/write parameters in a frequency converter
via the Profibus network. This w ill elim inate the
need for an extra communication network.
The MCT 10 Set-up Software Modules
The following mod ules are included in the
software package:
MCT 10 Set-up Software
Setting parameters
Copy to and from frequency
converters
Documentation and print out of
parameter settings incl. diagrams
SyncPos
Creating SyncPos programme
Ordering number:
Please order your CD containing MC
T10Set-up
Software using code number 130B1000.
MCT 31
The MCT 31 harmonic ca lcula tion PC tool enables
easy estimation of the harmonic distortion in a given
application. Both the harmonic distortion of Danfoss
frequency converters as well as non-Danfoss frequency
converters with different additional harmonic reduction
measurements, such as Danfoss AH F filters and
12-18-pulse rectifiers, can be calculated.
Ordering number:
Please order your CD containing the MCT 31 PC
tool using code number 130B1031.
MG.28.E9.02 - VLT is a registered Danfoss trademark
22

Danfoss VT2800 Series Specifications

General

Brand	Danfoss
Model	VT2800 Series
Category	Controller
Language	English