EasyManuals Logo

DataCard CD800 Installation And Administrator's Guide

DataCard CD800
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
SD260L/SD360/SD460 Installation and Administrator’s Guide 47
 EthAddressMethod—The method used to obtain the IPv4 network IP address. Select DHCP
or STATIC from the Current Value drop-down list.
 When the value is DHCP, the EthGatewayAddress, EthIpAddress, and EthSubnetMask
values are controlled by the DNS server and the settings are filled in automatically.
 When the value is STATIC, the EthGatewayAddress, EthIPAddress, and EthSubnetMask
values must be set manually.
 EthGatewayAddress—Enter the gateway address for the Ethernet network.
 EthIpAddress—Enter the static IP address for the printer.
 EthSubnetMask—Enter the subnet mask for the Ethernet network.
 EthDnsAddress1, EthDnsAddress2, EthDnsSearchSuffix—These settings are not used at this
time.
 IPMode—Specify the IP mode used by the printer. The printer can support both IPv4 and
IPv6 addressing. You can select from the following
 IPv4—The printer uses IPv4 addressing only.
 DualStack—The printer can use both IPv4 and IPv6 addressing.
The remaining IPv6 settings become applicable when IPMode is set to DualStack.
 IPv6DefaultGateway—Set a default gateway address. This setting is disabled when set to the
default of “::”.
 IPv6DHCPv6Select—Select whether or not the printer obtains an address and stateful
configuration from a DHCPv6 server. Disable this setting if a DHCPv6 server is not present.
 IPv6DNSPrimaryAddress, IPv6DNSSecondaryAddress—These settings are not used at this
time.
12) IPv6DNSSecondaryAddress :: ::
13) IPv6ManualAddress :: ::
14) IPv6ManualPrefixLength 64 64 [0 – 128]
15) IPv6ManualSelect Disabled Enabled
16) IPv6StatelessAddrSelect Enabled Disabled
Description Default Value
Current Value
(unit)
Allowed
Range

Table of Contents

Other manuals for DataCard CD800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DataCard CD800 and is the answer not in the manual?

DataCard CD800 Specifications

General IconGeneral
Print Resolution300 dpi
Weight12 lbs (5.4 kg)
Power Requirements100-240 VAC, 50/60 Hz
Print TechnologyDye-sublimation
Card Capacity100 cards (standard hopper)
ConnectivityUSB
Card SizeCR80 (85.6 mm x 54 mm)
Operating System CompatibilityWindows
Card Thickness0.020" - 0.040" (0.51 mm - 1.02 mm)

Related product manuals