DataCard SD260L - Overlay Storage Guidelines

94 Supplies and Parts
Overlay Storage Guidelines
 Store overlay material in the original package until you load it in the laminator. Keep the
original packaging closed until you are ready to use the overlay.
 The overlay maintains its quality for about one year. For optimum card quality, purchase and
store quantities of material that can be used within one year.
 Overlay material might require secure storage and tracking. Follow your organization’s policy
for storing and tracking the supplies used to make cards.
 Store the overlay in a location away from direct sunlight, with a temperature between 50°
and 80°F (10° and 27°C). A range of 30% to 70% humidity is recommended.
 Install supply rolls at room temperature. If supplies are stored in an environment that is
cooler than the printer environment, allow supplies to reach room temperature before you
use them.
 If the printer will not be used for an extended period, remove supplies from the laminator
and store them with new supplies.