EasyManuals Logo
Home>DataCard>Printer>SD260L

DataCard SD260L Installation And Administrator's Guide

DataCard SD260L
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
SD260L/SD360/SD460 Installation and Administrator’s Guide 15
Enable IPv6
Use the front panel Configuration menu to enable the IPv6 option used by your network.
1. Enter the menu system.
a. Press the U
SER button to suspend the printer.
b. Press E
NTER key enter the menu system.
c. Press the down arrow key until Configuration displays on
line 2.
d. Press E
NTER to enter the Configuration menu.
e. Press the down arrow to display Network IPv6 on line 2.
f. Press E
NTER to enter the Network IPv6 menu.
2. Set the IP Mode.
The IP Mode determines whether the printer uses IPv4-only or
both IPv4 and IPv6 addressing.
a. Press E
NTER to enter the IP Mode menu.
This Guide assumes that your IPv6 network is configured and that you have the
information you need to set up the card printer. If you need information about your
network configuration, contact your network administrator.
The following example illustrates enabling a Manual IPv6 address.
2X

Table of Contents

Other manuals for DataCard SD260L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DataCard SD260L and is the answer not in the manual?

DataCard SD260L Specifications

General IconGeneral
Card size85.6 x 53.98 mm
Card typesMagnetic stripe (ISO 7811), PVC
Card feederYes
Duplex printingNo
Print technologyDye-sublimation/Resin Thermal transfer
Maximum resolution300 x 300 DPI
Print speed (color)830 card/h
Print speed (monochrome)200 card/h
DisplayLCD
Product colorBlue, Grey
Internal memory128 MB
Cable lock slot typeKensington
Total input capacity100 sheets
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Storage temperature (T-T)-15 - 60 °C
Operating temperature (T-T)15 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
USB version2.0
Ethernet interface typeFast Ethernet
Windows operating systems supportedWindows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64
Weight and Dimensions IconWeight and Dimensions
Depth539 mm
Width175 mm
Height224 mm
Weight5400 g

Related product manuals