DataCard SD260L Installation And Administrator's Guide

A-4 SD460 Laminating System
Unpack the System
Remove the printer and laminator from their shipping cartons.
1. Open the printer shipping carton and remove the printer and its accessories.
2. Open the laminator shipping carton and remove the accessories boxes.
3. Lift the laminator from the carton and remove the foam end caps.
4. Place the laminator on a surface that meets the requirements specified in “SD460 Site
Requirements” on page A-2.
5. Secure the laminator, if necessary. Refer to “Bolt-Down Option” on page A-5.
Save the shipping cartons and packing materials. They are required if you need to
store, move, or return the system for service.
Laminator
Power Supplies
and Cords
Packing Materials
(foam end caps)

DataCard SD260L Specifications

General

Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC
Card feeder	Yes
Duplex printing	No
Print technology	Dye-sublimation/Resin Thermal transfer
Maximum resolution	300 x 300 DPI
Print speed (color)	830 card/h
Print speed (monochrome)	200 card/h
Display	LCD
Product color	Blue, Grey
Internal memory	128 MB
Cable lock slot type	Kensington
Total input capacity	100 sheets
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
USB version	2.0
Ethernet interface type	Fast Ethernet
Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64

Weight and Dimensions

Depth	539 mm
Width	175 mm
Height	224 mm
Weight	5400 g