EasyManuals Logo

DataCard SD260L Installation And Administrator's Guide

DataCard SD260L
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
SD260L/SD360/SD460 Installation and Administrator’s Guide 47
 EthAddressMethod—The method used to obtain the IPv4 network IP address. Select DHCP
or STATIC from the Current Value drop-down list.
 When the value is DHCP, the EthGatewayAddress, EthIpAddress, and EthSubnetMask
values are controlled by the DNS server and the settings are filled in automatically.
 When the value is STATIC, the EthGatewayAddress, EthIPAddress, and EthSubnetMask
values must be set manually.
 EthGatewayAddress—Enter the gateway address for the Ethernet network.
 EthIpAddress—Enter the static IP address for the printer.
 EthSubnetMask—Enter the subnet mask for the Ethernet network.
 EthDnsAddress1, EthDnsAddress2, EthDnsSearchSuffix—These settings are not used at this
time.
 IPMode—Specify the IP mode used by the printer. The printer can support both IPv4 and
IPv6 addressing. You can select from the following
 IPv4—The printer uses IPv4 addressing only.
 DualStack—The printer can use both IPv4 and IPv6 addressing.
The remaining IPv6 settings become applicable when IPMode is set to DualStack.
 IPv6DefaultGateway—Set a default gateway address. This setting is disabled when set to the
default of “::”.
 IPv6DHCPv6Select—Select whether or not the printer obtains an address and stateful
configuration from a DHCPv6 server. Disable this setting if a DHCPv6 server is not present.
 IPv6DNSPrimaryAddress, IPv6DNSSecondaryAddress—These settings are not used at this
time.
12) IPv6DNSSecondaryAddress :: ::
13) IPv6ManualAddress :: ::
14) IPv6ManualPrefixLength 64 64 [0 – 128]
15) IPv6ManualSelect Disabled Enabled
16) IPv6StatelessAddrSelect Enabled Disabled
Description Default Value
Current Value
(unit)
Allowed
Range

Table of Contents

Other manuals for DataCard SD260L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DataCard SD260L and is the answer not in the manual?

DataCard SD260L Specifications

General IconGeneral
Card size85.6 x 53.98 mm
Card typesMagnetic stripe (ISO 7811), PVC
Card feederYes
Duplex printingNo
Print technologyDye-sublimation/Resin Thermal transfer
Maximum resolution300 x 300 DPI
Print speed (color)830 card/h
Print speed (monochrome)200 card/h
DisplayLCD
Product colorBlue, Grey
Internal memory128 MB
Cable lock slot typeKensington
Total input capacity100 sheets
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Storage temperature (T-T)-15 - 60 °C
Operating temperature (T-T)15 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
USB version2.0
Ethernet interface typeFast Ethernet
Windows operating systems supportedWindows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64
Weight and Dimensions IconWeight and Dimensions
Depth539 mm
Width175 mm
Height224 mm
Weight5400 g

Related product manuals